Packaging tweaks.

TODO

+Support CBV to local domains and cache results so that invalid users
+can be rejected without maintaining valid user lists.
+
+Now that we blacklist IPs for too many bad rcpts, delay SPF until RCPT TO.
+
 Convert DSN to REJECT unless sender gets SPF pass or best guess pass.  Make
 configurable by SPF result with NOTSPAM policy (reject or deliver without DSN).
 Maybe policy should be NODSN - still verify sender with CBV.

bms.py

 #!/usr/bin/env python
 # A simple milter that has grown quite a bit.
 # $Log$
+# Revision 1.116  2007/11/01 20:09:14  customdesigned
+# Support temperror policy in access.
+#
 # Revision 1.115  2007/10/10 18:23:54  customdesigned
 # Send quarantine DSN to SPF pass (official or guessed) only.
 # Reject blacklisted email too big for dspam.
@@ -740,9 +743,9 @@ class bmsMilter(Milter.Milter):
 
     self.user = self.getsymval('{auth_authen}')
     if self.user:
-      # Very simple SMTP AUTH policy by defaul:
+      # Very simple SMTP AUTH policy by default:
       #   any successful authentication is considered INTERNAL
-      # FIXME: configure allowed MAIL FROM by user
+      # Detailed authorization policy is configured in the access file below.
       self.internal_connection = True
       self.log(
         "SMTP AUTH:",self.user, self.getsymval('{auth_type}'),

milter.cfg

 [milter]
+datadir = /var/log/milter
 # the socket used to communicate with sendmail.  Must match sendmail.cf
 socket=/var/run/milter/pythonsock
 # where to save original copies of defanged and failed messages
@@ -186,6 +187,11 @@ blind = 1
 
 # Map email addresses and aliases to dspam users
 ;dspam_users=david,goliath,spam,falsepositive
+# List dspam users which train on all delivered messages, as opposed to
+# "train on error" which trains only when a spam or falsepositive is reported.
+# Training mode will build the dictionary faster, but requires close attention
+# so as not to miss any spam or false positives.
+;dspam_train=goliath
 ;david=david@foocorp.com,david.yelnetz@foocorp.com,david@bar.foocorp.com
 ;goliath=giant@foocorp.com,goliath.philistine@foocorp.com
 # address to forward spam to.  milter will process these and not deliver

milter.rc

@@ -46,7 +46,7 @@ start() {
 stop() {
 	# Stop daemons.
 	echo -n "Shutting down $prog: "
-	killproc milter
+	killproc -d 5 milter
 	RETVAL=$?
 	echo
 	[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/milter

pymilter.spec

+# This spec file contains 2 noarch packages in addition to the pymilter
+# module.  To compile all three on 32-bit Intel, use:
+# rpmbuild -ba --target=i386,noarch pymilter.spec
+
 %define version 0.8.9
-%define release 1
+%define release 2
 # what version of RH are we building for?
 %define redhat7 0
 
@@ -29,10 +33,6 @@
 %define libdir /usr/lib/pymilter
 %endif
 
-# This spec file contains 2 noarch packages in addition to the pymilter
-# module.  To compile all three, use:
-# rpmbuild -ba --target=i386,noarch pymilter.spec
-
 %ifarch noarch
 Name: milter
 Group: Applications/System
@@ -112,16 +112,7 @@ find /var/log/milter/save -mtime +7 | xargs $R rm
 EOF
 chmod a+x $RPM_BUILD_ROOT/etc/cron.daily/milter
 
-%ifos aix4.1
-cat >$RPM_BUILD_ROOT%{libdir}/start.sh <<'EOF'
-#!/bin/sh
-cd /var/log/milter
-# uncomment to enable sgmlop if installed
-#export PYTHONPATH=/usr/local/lib/python2.1/site-packages
-exec /usr/local/bin/python bms.py >>milter.log 2>&1
-EOF
-%else # not aix4.1
-cp start.sh $RPM_BUILD_ROOT%{libdir}
+%ifnos aix4.1
 mkdir -p $RPM_BUILD_ROOT/etc/rc.d/init.d
 cp %{sysvinit} $RPM_BUILD_ROOT/etc/rc.d/init.d/milter
 cp spfmilter.rc $RPM_BUILD_ROOT/etc/rc.d/init.d/spfmilter
@@ -141,18 +132,8 @@ python="%{python}"
 w
 q
 EOF
-ed $RPM_BUILD_ROOT%{libdir}/start.sh <<'EOF'
-/^python=/
-c
-python="%{python}"
-.
-w
-q
-EOF
 %endif	# aix4.1
-chmod a+x $RPM_BUILD_ROOT%{libdir}/start.sh
 
-mkdir -p $RPM_BUILD_ROOT/var/run/milter
 mkdir -p $RPM_BUILD_ROOT/usr/share/sendmail-cf/hack
 cp -p rhsbl.m4 $RPM_BUILD_ROOT/usr/share/sendmail-cf/hack
 
@@ -185,7 +166,6 @@ fi
 
 %files 
 %defattr(-,root,root)
-%config %{libdir}/start.sh
 /etc/logrotate.d/milter
 /etc/cron.daily/milter
 %{libdir}/bms.py?
@@ -254,13 +234,39 @@ env CFLAGS="$RPM_OPT_FLAGS" LDFLAGS="$LDFLAGS" %{python} setup.py build
 %install
 rm -rf $RPM_BUILD_ROOT
 %{python} setup.py install --root=$RPM_BUILD_ROOT --record=INSTALLED_FILES
+mkdir -p $RPM_BUILD_ROOT/var/run/milter
+mkdir -p $RPM_BUILD_ROOT%{libdir}
+%ifos aix4.1
+cat >$RPM_BUILD_ROOT%{libdir}/start.sh <<'EOF'
+#!/bin/sh
+cd /var/log/milter
+# uncomment to enable sgmlop if installed
+#export PYTHONPATH=/usr/local/lib/python2.1/site-packages
+exec /usr/local/bin/python bms.py >>milter.log 2>&1
+EOF
+%else # not aix4.1
+cp start.sh $RPM_BUILD_ROOT%{libdir}
+ed $RPM_BUILD_ROOT%{libdir}/start.sh <<'EOF'
+/^python=/
+c
+python="%{python}"
+.
+w
+q
+EOF
+%endif
+chmod a+x $RPM_BUILD_ROOT%{libdir}/start.sh
 %if !%{redhat7}
 grep '.pyc$' INSTALLED_FILES | sed -e 's/c$/o/' >>INSTALLED_FILES
 %endif
 
+# start.sh is used by spfmilter and milter, and could be used by
+# other milters running on redhat
 %files -f INSTALLED_FILES
 %defattr(-,root,root)
 %doc README HOWTO ChangeLog NEWS TODO CREDITS sample.py milter-template.py
+%config %{libdir}/start.sh
+%dir /var/run/milter
 
 %endif # noarch